Mixo 8 — Daily Use Guide
Machine Set Up (done only once)
Ensure the machine is plugged in and powered on. Check that the touchscreen responds and displays cocktail recipes. Verify the fridge temperature is under 5°C (41°F). Place all bottles in their correct slots — tap the bottle icon on the touchscreen to see the configuration — and ensure all bottle covers are properly inserted and securely connected.
Pouring a Cocktail
Once the machine is ready, tap Cocktails on the touchscreen. Browse by category or tap Search to find a specific cocktail. Tap a cocktail to view its recipe and follow the preparation instructions on screen. Place a glass or shaker underneath the dispensing head, then tap Go and wait for the cocktail to be poured. Follow the serving instructions displayed on screen.
Replacing a Bottle
Open the fridge, unscrew the cap of the empty bottle, and place the new bottle in the same slot. Find the tube number matching that slot, insert the hard tube into the bottle ensuring the tip reaches the bottom, and close the bottle securely with the corresponding numbered bottle cover.
Calibration
Calibration is required whenever you change the brand or ingredient type in a slot. To calibrate, tap the menu icon, go to Settings, then Calibration. Select the bottles to calibrate by tapping each one, tap Go, and follow the on-screen instructions using the calibration glass supplied with the machine. Calibration is not needed when replacing a bottle with the same ingredient.
End of Day Cleaning
Juices in the fridge must be cleaned daily. Spirits must be cleaned weekly. At the end of each day, run the cleaning cycle for juice bottles only. Remove the bottle covers and hard tubes, take the bottles out, pour lukewarm water into the transparent 4-bottle tray, then make sure all bottle inner tubes are in the water. Place the cleaning container under the dispensing head and tap Clean. Once complete, empty the cleaning container, return the bottles to their positions, reinsert the correct tubes, place the cleaning container back under the dispensing head, and tap Fill the Tubes. Also empty and rinse the drip tray, wipe down all surfaces, and turn off the machine — but leave the fridge running overnight.
Technical Support
We offer direct technical support for all Mixologiq machines, including remote diagnostics. When contacting us, please provide your machine ID (4-digit number, back label) and ensure the machine is online via Wi-Fi or Ethernet.
Email: support@mixologiq.com
We are in time zone GMT+1 (Central European Standard Time)
We are available from Monday to Friday 9:00 till 18:00 (6:00pm)